Blogigami

Your blog for everything origami.


Leave a comment

Lily

DSCN0034

1. Make a frog base.

DSCN0036

2. Fold the tip of the interior diamond down, like so. Do this for the remaining three interior diamonds.

DSCN0038

3. Turn the paper around so the open end is pointing upward.

DSCN0043

4. Fold the layers of paper over so both the front and back sides of the diamond look like this.

DSCN0045

5. On the top layer of paper, fold the sides in, like so. Do this for the remaining three similar flaps of paper.

DSCN0049

After you complete Step 5, your paper should look like this.

DSCN0054

6. Bend the tip of the top layer of paper downward, like this. Crease the paper firmly.

DSCN0058

7. Repeat Step 6 on the remaining three flaps of paper.

DSCN0059

8. Using your finger, curl the petals for detail. Congratulations! Your origami lily is complete!

Advertisements


Leave a comment

Tree Frog

DSCN9941

1. Make the frog base.

DSCN9943

2. Fold the right flap of paper over to create a smooth diamond shape. Repeat on the back side of the base.

DSCN9944

3. Fold the sides of the paper inward, like so.

DSCN9950

4. Repeat Step 3 on the remaining three smooth paper surfaces.

DSCN9951

5. With the top layer only, bring the bottom of the paper upward.

DSCN9955

6. Next, smoosh the paper between the folds on either side of it. This is similar to how you would create the crane’s next and tail.

DSCN9956

7. Bend the paper like so, and crease it so that the arm jutting out from the side folds in on itself. This step is very similar to how you would create the crane’s beak.

DSCN9958

The result of Steps 5 -7 should look like this.

DSCN9963

8. Repeat Steps 5 -7 on the flap of paper to the left of the arm you just made. (Tip: Do not try to position the arms directly across from each other at this point in the process. They will move into place when you go on to create the frog’s legs.)

DSCN9966

9. After you have created the frog’s second arm, fold the flaps of paper over so that the arms are across from one another, and the remaining two flaps of paper are facing downward, like so.

DSCN9967

10. Repeat Steps 5-7 on one of the lower flaps of paper.

DSCN9970

Tip: Make sure to crease the paper near the bottom of the frog’s body.

DSCN9972

11. Repeat Steps 5-7 on the other leg.

DSCN9974

12. Make additional folds on the frogs arms and legs to add detail. (Tip: Fold in the opposite direction of the way the paper is resting. Make one upward fold on each arm, and one downward fold then one upward fold on the frog’s legs.)

DSCN9978

13. Hold the frog by its back legs and blow air into the small opening in the paper.

DSCN9979

Your origami tree frog is complete!


2 Comments

Frog Base

DSCN9913

1. Begin with a square base.

DSCN9915

2. Make sure the open end of the base is facing downward. Then, fold one of the sides into the middle, like so.

DSCN9916

3. Use your finger to slightly open the fold.

DSCN9919

4. Make a squash fold.

DSCN9922

5. Repeat Steps 2 – 4 on the remaining three flaps of the square base.

DSCN9924

6. Fold the sides of the top layer of paper inward, like so. Then, undo these folds.

DSCN9925

7. Insert a finger into the space in the middle of the frog base and carefully begin to move it upward. This step is similar to completing Steps 5 and 6 of the crane base.

DSCN9928

After you complete Step 7, your frog base should look like this. (Tip: It’s okay to be a little bit forcefully with the paper when trying to smooth out the top part of the interior diamond. I’ve also found that using my fingernail to strongly crease the upper corners of the interior diamond really helps to shape it correctly.)

DSCN9935

8. Repeat Steps 6 and 7 on the remaining three squash-folded layers of paper, and your frog base is complete!